Hybrid standard optics (directional-wide-directional) in each 3-up unit
Hybrid standard optics (directional-wide-directional) DWDDWD in each 6-up unit
Directional, wide and hybrid optics available for horizontal or vertical application
3-up features synchronous capability with other 3-up Optix models
3-up has 5 flash patterns
6-up has 21 flash patterns, including wig-wag and steady burn capability
Synchronous 6-up unit with 2 independently controlled 3-up LED drivers has 7 flash patterns (specify "S" for snychronous in model # when ordering)
When properly configured, the LED X™ 2100 complies with SAE and CA Title XIII
Unique LED X™ optics
Clear lenses and the absence of color in the lightbar produce an inconspicuous appearance
The lightbar can be controlled through any of the standard Code 3® switch packs or siren/switch controls
Perfect for motorcycle mounting
Excellent perimeter light for Fire/EMS vehicles
No bulb replacement ever required
Outside mirror mount available to seal the LED in the outside mirror with a rubber grommet. This option fits Ford Crown Victoria, Ford Explorer, Ford Expedition with versions coming for Chevrolet Impala and Tahoe
Meets and exceeds all SAE & CA Title XIII standards
Mastercom
RLS
RX 2700
Optional 200w
Interclear®
Light alert
Mic jack
Quick disconnect
Serial Interface upgrades available to allow control of LEDX2100SC lightbars and accessories via the Remote Lighted Siren system
RLS Virtual Control Head Kit available to allow control of both the Remote Lighted Siren and the RLS serial interface system via laptop PC or MDT
One serial plug controls your: lightbar, siren, ArrowStik®
Current boost module
200w option available
Load Manager option allows you to guard against depleting the vehicle's battery to the point that the vehicle cannot be started.
NightProbe® control module (model 3999)
Model 3997 comes standard with ArrowStik® control built into the siren's control head
12 PriZm lightheads in each corner position
8 LED or 3 LED directional PriZm lightheads in front and rear positions
55w Halogen takedown lights
35w MR-11 Alley lights
Easy to install LIT3 Mounting platform (included)
Several configurations to choose from
Low power Dimming mode
Variety of flash patterns
Strobe Pack
Warrior
XT3
Can be used to power the following items: hide-a-way strobes, AS strobes, Perimeter lights, RVMRS, RVM1SR
Four and two head systems with cycle flash
Color or clear strobe tube systems
Cables can be upgraded from 15 to 20ft and 15 to 25ft
HCL490 includes 30' cables
Power supply can be upgraded from PSE460 to PSE475
Multiple flash patter selection standard
Code 3 Optix brand LEDs - larger, brighter signal
Choice of optics (wide is standard)
User-selectable flash patterns, changed at the push of a button built into the housing
Flash pattern memory - auto programming returns unit to last pattern selected before power was removed
Single or dual colors side-by-side available in 6-up Optix version
Compact and lightweight
Housing designed to reduce reflection or signal back into occupants' eyes
Nine foot lighter plug power cord with on/off switch
10-16 volts DC
Low amp draw
Reverse polarity - protects unit from inadvertent reversal of positive/negative inputs during hardwiring
Easy mounting - suction cup or L-bracket
5 year warranty on LEDs
1 year warranty on housing
Twelve flash patterns
Clear lens with red, blue, amber, green or white LEDs
