Synchronize N500 and BULL LED, any combination, up to 20 heads.
5 Year Warranty
UV stabilized Polycarbonate outer dome
Rugged, glass-filled Nylon injection-molded base
UV stabilized, bonded, Opaque sun shield
Twin ultra-low UV stabilized Polycarbonate Fresnel domes
30 Watt field replaceable strobe power standard; easy install with 2 screws
Available in Magnet or Flush mount versions
Magnetic version features a 12-foot cord with cigarette lighter plug
All mounting hardware included in both versions
Available in all 5 safety color combinations: Amber, Blue, Clear, Green, Red
Cycle flash pattern: Double, Quad, Mega
1/4 inch thick mounting gasket included in flush mount version
All of the beacons in this series are LEGAL LIGHTS which have been tested to meet the SAE (Society of Automotive Engineers) J1318 standards and are listed with AMECA (Automotive Manufacturers Equipment Compliance Agency, Inc.; formerly AAMVA - American Association of Motor Vehicle Administrators).
The SB4000 series beacons emit high intensity strobe light bursts which easily identify any utility or emergency vehicle, in all weather conditions. High/Low power control is standard to provide intensity reduction on demand.
The SB4000 series beacons are based on a rugged field replaceable electronic board that is polarity and surge protected. The highly efficient MOSFET-based design provides very low current drain - a fraction of the current required for a rotating beacon. The economical field replaceable flash tube is simple to replace; just remove two screws! Inventory requirements are reduced as the impact resistant Polycarbonate base provides permanent and 1" NPT pipe mount options in the same part. The SB4000 series beacons operate on any voltage between 10 and 30VDC.
Select one of five safety colors in either the high or low lens profile; the lenses are completely interchangeable. Choose one of two flash patterns, quad or double. Choose the reliable SB4000 series beacons from Nova for your next warning signal application.
Nova Windshield Pre Emption
High and low priority emitter in a single unit
Crystal controlled accuracy - low current drain: 1.35 amps
Active high and active low enable/disable
Single wire high/low priority selection
Flashback shield and windshield bracket included
Bail mount bracket and all hardware included
Compatible with all existing Pre-emption emitters and detectors
